Product Description

Hairline Stainless Steel Sheet generally refers to the surface grain plus collectively, the former name is frosted board, the surface grain has straight grain, disordered grain (and grain), ripple and thread and other main kinds.

1, drawing straight lines are usually in the stainless steel surface mechanical friction processing method after the surface state is straight lines. The processing process of the wire drawing plate can eliminate the scratches on the surface of the stainless steel plate raw material, and it also has a good decorative effect. This kind of grain also has filament grain and short grain road, because this grain is the use of clean cloth or stainless steel brush on the surface of the plate for a straight line or short line, and can be changed by the diameter of the steel brush to get different thickness of grain.

2. Seen from a distance, the sand grain of drawing messy lines (and lines) is composed of a circle of sand grain, and near is non-standard messy lines. It is ground by irregular swing around the grinding head, and then electroplating and coloring. The texture of the surface is matte, and the production requirements are very high.

3, drawing corrugated production process is the use of brushing machine or rubbing machine on the group of the grinding roller axial movement, so that the stainless steel surface after grinding and brushing to get wavy grain.

4, drawing thread production processing technology has some characteristics, first with a small motor, its shaft is equipped with a round felt, the small motor is fixed on the table, but also with the edge of the table into about 60 degrees of Angle. Then a drag plate is made to hold the stainless steel plate, and a strip of polyester film is pasted along the edge of the drag plate, in order to limit the thread speed. In this way, the straight line movement of the felt and mop can be rotated, and the same width of thread lines can be obtained on the surface of the stainless steel plate.

Details Page